6.4mm SKIMMED

Gyproc M-Strip Ceiling System_6.4 mm : MATERIAL CALCULATION

Fill in variables in the BLUE boxes

Enter the size of the application

Room Length m
Room Width m
Ceiling Area sqm
Perimeter m
Truss c/c (1.2m max) m
Ā 
***Select applicable framework - GYPFRAMEā„¢, GYPFRAMEā„¢ UltraSTEELĀ® BRANDERING, GYPFRAMEā„¢ FRAMEWORK or TIMBER
Ā 
COMPONENTS Estimated Quantities
Lining and related items
Ā 
1 boards
Ā 
2 Gyproc Galvanised Angle 25mm x 25mm 3.6 meter per length lengths
bundles (25)
Ā 
3 Gyproc Rhino Cove Corniceā„¢ 75/125mm 3 meter per length lengths
ONLY 75mm in stacks stacks (98)
Ā 
4 Gyproc Sharp-point Screws 25mm 1000 screws per box each
boxes
Ā 
SELECT APPLICABLE INSULATION BELOW : -
Ā 
5 rolls
Ā 
6a rolls
Ā 
6b boards
packs
Ā 
7 Gyproc RhinoLiteĀ® 3-5 mm skim select 10kg or 40 kg bags bags
pallets
Ā 
8 Gyproc RhinoTapeĀ® 45m per roll rolls
Framework and related items

Select applicable framework

Ā 
9a Gypframeā„¢ N
Ā 
9a1 Gypframeā„¢ N Main Bar 3.66 meter per length lengths
bundles (20)
Ā 
9a2 Gypframeā„¢ N Cross Furring Channel 3.6 meter per length lengths
bundles (20)
Ā 
9a3 Gypframeā„¢ N Square Wall Angle - wall perimeter 3.6 meter per length each
Ā 
SELECT EITHER 9a4 OR 9a5 FROM BELOW
Ā 
9a4 Number of Hanger POINTS - Threaded Bar (by others) suspension points
9a5 Number of Hanger POINTS - Wall Angle suspension points
Ā 
9b Gypframeā„¢ Framework
Ā 
9b1 Gypframeā„¢ Main Tees (T37K) (3.6m @ 1.2c/c) each
boxes
Ā 
9b2 Gypframeā„¢ Cross Tees (T32K) (1.2m @ 0.4c/c) each
boxes
Ā 
9b3 Number of Hanger POINTS - suspension of ceiling framework suspension points
Ā 
9b4 Gyproc Plaster Trim (3.6m) lengths
Ā 
9c Gyproc UltraSTEELĀ® Brandering
Ā 
9c1 Gyproc UltraSTEELĀ® Brandering 3 meter per length lengths
bundles (10)
Ā 
9c2 Gyproc Suspension Bracket brackets
bags (300)
Ā 
9c3 Gyproc Grabber Screws 32mm 1000 screws per box each
boxes
Ā 
9d Timber Brandering by others
Ā 

Ā 

Ā 

PLEASE NOTE: that the figures quoted are an estimate only - site conditions, project constraints and workmanship methodology vary per project & will influence quantities. wastage is not included. quantity of selected suspension type will depend on the plenum depth and will vary per project.

Ā 

Ā